View Single Post
Old 06-03-2013, 12:47 PM   #90
dwj - Donnie OP
Beastly Adventurer
 
dwj - Donnie's Avatar
 
Joined: Apr 2006
Location: Traveling on the Moto or Escuitla, Chiapas, Mexico
Oddometer: 13,181
Quote:
Originally Posted by DesertSurfer View Post
The newer 990's were updated with a different wp oring made of viton ( or another manufacturer of the same material, as viton is a Dupont product). And this seal is what they recommend to replace all older wp seals with.

I managed to get this info from a KTM tech customer rep from Ohio recently.

One of the customer service advantages of being a original owner of a KTM Adventure is any KTM shop, KTM service rep or customer service rep can check the history of your bike, explain any service updates and status reports on your bike based on their database.

Since my bike was an '04 S they are researching to make sure I don't have the noisier '05 version of torque limiter.
Quote:
Originally Posted by gefr View Post
The water pump seal is not oring shape and is not made from "viton" material. It is a seal made of teflon, in place of the older one made of red rubber.

http://www.ktm950.info/how/ktm_950_issues.html

Whatever info you need you can readit in here http://www.ktm950.info/ and educate all these KTM employed clueless guys.

Cheers
Quote:
Originally Posted by Misery Goat View Post
I didn't carry a wp rebuild kit on my trip and didn't need it, just under 40K miles.


Thanks guys! I read Vinney's detailed hotel repair. That might be the reason he is on the third rebuild!
dwj - Donnie is offline   Reply With Quote