View Single Post
Old 06-06-2013, 07:22 AM   #883
Gnarly Adventurer
Delta61's Avatar
Joined: Dec 2007
Location: Southeast Alabama
Oddometer: 260
Tool use on 1200 GSA's

As i previously posted i said i was working on a way to use this on my 2010 GSA. This is what i came up with and it works great. For the front wheel i got a 6 inch piece of 3/4 inch inside diameter PVC and ground it down on the grinder to fit inside of a 6 inch long 1 inch inside diameter piece of PVC. I then added a coupler to the top of the 1 inch ID pvc then ground that down below the coupler to fit the front wheel.Looks like this

For the rear wheel i took the small(15MM) adapter and had it turned down to fit the inside of the rear wheel adapter of my Marc Parnes tire balancer

This works great for me and hope this helps those of you that have GS and GSA's

"Keep the Greasy Side Down"

10 1200 GSA
07 X Challenge
04 1150 GS(SOLD)
Delta61 is offline   Reply With Quote