View Single Post
Old 06-09-2013, 06:17 PM   #10
disston
ShadeTreeExpert
 
disston's Avatar
 
Joined: Mar 2011
Location: Silver Spring, Md
Oddometer: 8,988
To rotate the engine with the rear wheel. Raise bike on center stand, it looks like you have a Reynolds Ride Off Stand so you will have to put a piece of half inch plywood or other prop under the center stand to get the rear wheel off the ground. Once the rear wheel is not touching the ground put the bike in 5th gear and with the spark plugs removed you can rotate the engine.

No more talking about taking bike to the dealer. That does not work. Dealers do not have mechanics that know or want to know about Airheads. Very few dealers have mechanics with any experience with Airheads. Their mechanics will merely be getting paid by you to learn the stuff you are trying to learn.

You have both exhaust pipes off already? Try to take pictures as you go along and post them here. Here is the tutorial on posting pics on AdvRider. You will need an off site picture hosting service that can be linked directly to. Then the pics will have to stay there till not used anymore. Once you move or erase the images at the place where the pic is linked to here it will also disappear here.

Nice looking bike.
__________________
.
Never memorize something you can look up.
---Albert Einstein

Pay your debt, piratejohn.http://www.advrider.com/forums/showthread.php?t=949341

disston screwed with this post 06-09-2013 at 06:23 PM
disston is offline   Reply With Quote