View Single Post
Old 06-14-2013, 04:01 PM   #89
Cdubs
made for adventure
 
Joined: May 2011
Location: SF, CA
Oddometer: 109
I'll have mine apart soon, I can't take the bearing off of the bottom of the stem though. What parts exactly do you need?

Quote:
Originally Posted by HPMGuy View Post
Thanks for the info Jenna!


Thanks C-Dub for the info on the nut as well. The KTM bolt uses the same pitch, though smaller diameter. I have decided to stick with the KTM size/pitch for uniformity, but add length similar to the original version. This way those that have the previous set of triples can use the upgraded nut as well.

Now for the bearing/stem fit....does anyone have a stem bearing set they can send me? I would like to verify some dimensions to see if any changes are necessary as Jenna suggests.



Thanks Clay Spinner, I think we'll be OK with the original pricing. The only difference might be the bolt as it was pretty reasonable through KTM.

Cdubs screwed with this post 06-14-2013 at 06:19 PM
Cdubs is offline   Reply With Quote