Originally Posted by alongat
There is a thread here in orange crush but it references this one within it:
I will say though that apparently, this can also be accomplished via TuneECU by bypassing this functionality through software rather than cutting / removing wires but if you don't have TuneECU and the cable, you can just cut.
Thanks a million mate for the thread. I do not have the tune-ecu cable, but will try to dis-connect it at the connector for now. However I do have the Akro's on with the Akro map, but will try it out & see if it makes a big difference.
Let me know how your mod went off after dis-connecting the wires & if there was a big difference.