Trust me guys, it's not there. I checked the hole with a mirror and I can see threads for the bolt, inlet hole for the oil, taper and second smaller thread for the jet. I can stick a rod to the hole and it goes deeper than possible if there would be a jet installed.
So please, just give me any ideas why would someone remove this jet and why my engine/gearbox still works. I must say that getting the neutral from 1st is tricky (also when in move) but I get neutral consistently from 2nd. I guess this is somewhat normal with this bike.
Additional clarification: I do have the allen bolt to seal the hole and also there is oil in the whole so it is not completely blocked, just the jet is missing.
rehto screwed with this post 06-29-2013 at 07:39 AM