View Single Post
Old 06-30-2013, 01:05 PM   #7
smitty141
Studly Adventurer
 
smitty141's Avatar
 
Joined: Apr 2007
Location: Hooterville Mo.
Oddometer: 588
Here's the spacers that I used.

A large washer 1/8" thick on the top mount.



.500 or 1/2" on both sides of the rear loop.



Passenger peg right front .700
Passenger peg right rear 1.565



Passenger peg left side rear .800
I modified the left side front because my boot would catch on it. Keep in mind I wear a 14 boot. Need to get a button head for the front bolt.



You will have to use longer bolts, just add the spacer length to the bolt length. I like the button head, just less to rub on your boot.

Also, the spacers would not be that long if you run the passenger pegs, I just have them removed.

Hope this helps.

Smitty
__________________
2011 Prudoe bay, Dalton Hwy.
2014 Inuvik, NWT. Demster Hwy. D2D, Yukon
----------------------------------------------------
2013 Yamaha FJR1300...2010 BMW F800GS..
1999 Yamaha YZ250.. 2008 Suzuki DRZ400SM
smitty141 is offline   Reply With Quote