View Single Post
Old 06-30-2013, 01:24 PM   #9
alongat OP
Beastly Adventurer
alongat's Avatar
Joined: Jan 2010
Location: Toronto, Canada
Oddometer: 1,253
Thank you - this is very helpful. I want to see what I can do to modify the jesse racks so I don't have to add width - I don't want to risk getting my feet caught in stuff either... Given that I don't plan to use the front section of the jesse rack loops and generally keep my panniers at the back, I may just modify the front area of those loops if I can do it cleanly without compromising strength, etc. though the spacers/shims seems to be the path of least resistance...

Originally Posted by smitty141 View Post
Here's the spacers that I used.

A large washer 1/8" thick on the top mount.

.500 or 1/2" on both sides of the rear loop.

Passenger peg right front .700
Passenger peg right rear 1.565

Passenger peg left side rear .800
I modified the left side front because my boot would catch on it. Keep in mind I wear a 14 boot. Need to get a button head for the front bolt.

You will have to use longer bolts, just add the spacer length to the bolt length. I like the button head, just less to rub on your boot.

Also, the spacers would not be that long if you run the passenger pegs, I just have them removed.

Hope this helps.

Toronto, Canada
KTM 1190 ADV, KTM 530 EXC
Gone: Ducati 999R, KTM 530EXC, KTM 990ADV-R, KTM 950ADV, KTM 690, KTM 640ADV, kTM RC8R, Ducati 996S, Yamaha R1
And how can this be? For he is the Kwisatz Haderach!
alongat is offline   Reply With Quote