Originally Posted by x17shane
I have a 2008 xcr-w 450 which I am assuming shares the same cradle. After finding this build I decided to build my own ktm500. I had a few questions for you what airboot did you use for your build as in model of bikes airboot was it a 2008 ktm 300 airboot and did you use the stock cr carburetor. and did you use stock swingarm spacers or did you have them made for you on a lathe. your build is awesome by the way you have some serious bike building talent.
The XC4 engine bikes have a different cradle (longer frt to Rear) than the RF4
Any 2t boot (08-10) 125-300
You can use the stock carb, I'm running a 39mm PWK
I made custom spacers (should be in a post)