View Single Post
Old 08-14-2013, 04:50 PM   #35
Gnarly Adventurer
Joined: May 2007
Location: Irvine
Oddometer: 153
Originally Posted by laramie LC4 View Post
couple questions as well.

1) did you disable the 02 sensors and the SAS?

2) how do you feel the mixture ratio is? you would think it might be a bit lean since your running a 2-2 exhaust system?

i have a complete rottweiler intake just waiting to go on (thank CPRFab ) but am really stressing baout the mapping.



Yes, I removed the SAS junk and I disabled the sensor through the TuneECU map. I had the dealer scan for codes after a few miles and nothing was found.

Don't stress about the map. I am running the CPR intake and dual FMF pipes. I loaded the CPR map for a 2 into 1 and the bike runs really good. The throttle response is insane!!

The bike does not show any symptoms for running lean. I think out of the 1200 miles since I got the intake, it back fired 2 or 3 times on decel. Not even an issue for me. You might worry if you are decelerating and the bike sounds like a firecracker.
2015 1290
2013 990
2001 996S

flynride screwed with this post 08-14-2013 at 06:01 PM
flynride is offline   Reply With Quote