If your throttle is hanging up, you need to fix the issue, not just remove things until it works! Lube the cables and make sure the throttle tube is not sticking on the bars or inside the housing. Remove the return cable and see if that helps relieve the issue. Good place to start trouble shooting but I would not remove it all together, not make if "a racer you know removes his so I am going to do the same" That is idiot logic. I know it was not you that said it, I am just bringing it back up. Good luck with the throttle issue!
Sorry, I didnt see they part where you said it worked better with one cable. How does the return cable feel when you run it back and forth by hand? It should be smooth as butter with no hard spots.
WunderfulLusterful screwed with this post 08-15-2013 at 07:50 PM