Originally Posted by Rally_West
You'd be wrong. There is plenty of room to get both the pre-filter off and the main filter in and out. Once it covered in dust the "wetness" of the oil is mostly gone so it is not that messy. Nothing a single paper towel can't handle. You have to remove the glove box and trim (obviously and then there is a TON of room in there. As mentioned earlier...you just have to make triple sure the filter is cliped over the lip on the left side.
We are talking about two different things here..... Yes, of course it will work with a ADV, either with OEM or AfterMarket Tanks, as you describe...... With the SE/SM it is as I have described.