View Single Post
Old 10-17-2013, 01:16 AM   #4
ADVill
Studly Adventurer
 
Joined: Sep 2013
Location: West Tn, USA
Oddometer: 538
Quote:
Originally Posted by Defaultgateway View Post
Yes, will work on 2012 990. You will be able to read/reset codes.
You will need the adapter cable, a laptop with a USB port, running XP, Win7 or Win8, (XP requires updated .NET files) or a Mac running Windows emulation. There are specific requirements regarding the USB/Serial virtual driver, see the TuneECU site for install instructions. (Win8 will install the correct one, Win7 or XP will need to have manual install for this step)
-->Check your batt. terminals, clean and tighten
-->Remove headlight fuse to keep current draw to a minimum while connecting/connected.
-->Use the key and not the red handle bar switch to turn your ecu on/off
-->Best to have your power adapter plugged into the laptop and have the laptop charged before connecting to the bike.

There are several threads in the Orange Crush on TUNE-ECU that will help. You can download the software and look at maps without the cable or connecting to a bike. Make sure you download a stock 2011 or 2012 KTM 990 map and load it to see the KTM screens to get familiar with the menus, etc.
Better than TuneEcu site's 'instructions'
__________________
'08 990 Adventure Orange of course
'00 520 EXC
ADVill is online now   Reply With Quote