another amateur rally racing thread
View Single Post
11-02-2013, 11:58 AM
I love sand !!!
Joined: Oct 2006
Location: Abu Dhabi, UAE
The bike is well set up IMO
The head light protection was getting in contact with the lights and i wanted to take care of this as well.
took the mask & cover off and then added a washer to the top two screws and that gave a good 2-3mm gap between the headlight and the protection.
started making some notes on the stuff that needs to be taken care of on the bike
i love KTM tool kits
In order to verify and get used to the bike, i used the std tool kit with that was on the bike to do all the work. That way i will know if anything needs to be added to the kit.
took the rear tanks off and carefully bent the mounting tabs outwards
found a couple of damaged/chafed wires and took care of them.
made turn signal indicator mounting brackets out of some metal strips that i had. These are temporary so that i can get the bike through inspection tomorrow and get it registered.
with the indicators, flasher unit and switch mounted + wired up - it works.....
Building a KTM 690Exc - the ultimate dirt tourer
2007 KTM Adv990S - Sold, 2010 KTM530Exc-Rally, 2012 KTM Adv990
View Public Profile
Find More Posts by Vicks