Originally Posted by PatSmith
I looked again to see if the other connector is 3 pin and it is a 3 pin connector. Odd that when connecting to the bmw, I used the 2 pin connector but for the KTM i need the 3 pin.
Ok, wiring is always a challenge to me, but i think i figured it out with this information.
"Three wires come into the back of this connector, arranged in a triangular pattern (i.e,. the outer two wires come into the connector at the same level, while the middle one is slightly higher). The wires are all the same color but if you’re looking at the back of the connector, with the top of the “triangle” pointed up, the outer cable on the right is ground, the outer cable on the left is power and the middle cable is unused. "