Originally Posted by COXR650L
I have cam chain clatter at idle when the bike is hot so I hope a new spring and valve solves the issues (Pydon mentioned the spring being worn in a post somewhere).
What parts fich is the Locking Lever CPL found in? I cant figure out where it is.
Thanks for the help
Edit: Nevermind I found it!
I doubt its the pressure release, pull the cir clip and measure the spring. Make sure you have a replacement cir-clip first...my broke, wasn't an issue as I replaced the whole thing. I'd check/replace the cam chain tensioners and springs. Measure the oil pump within spec.