The canisterectomy creates space in the left side fairing. I use the space vacated by the charcoal canister to hold a front tube and tire repair kit.
Unfortunately, there is a screw well and tower right in the middle of the opening:
I cut the well on the inside cover and tower on the inside of the fairing, as well as the two ribs that hold the canister in place.
This is what the opening looks like without the well and tower:
the bag with the tube and repair kit like this under the inside cover:
To get it in place, just slide it in through the opening:
The tube tucks into place nice and tight:
Used the KTM tool bag for the rear tube:
This one fits nicely in the space inside the right fairing: