View Single Post
Old 02-03-2014, 08:33 AM   #1
Aquatic OP
Beastly Adventurer
Aquatic's Avatar
Joined: Dec 2008
Location: Buddina, Sunny Coast, Australia
Oddometer: 1,617
BMW 650GS/Dakar/Sertao YZ/WR suspension upgrade

Axle kit - A$350.00

Axle and nut - 4140 steel, nickel plated
Right spacers - 304 Stainless Steel
Left spacer(with bearing cover) - 6061 T6 hard anodised

Calliper Hanger - A$125.00

Calliper hanger - 6061 T6 Aluminium, Anodised
Mounting holes - M8 with 102mm pitch
Please Note: this calliper hanger is designed to be used with 46mm and 48mm 'Open Cartridge' forks.
Closed Cartridge or SSS forks have a different hole pitch for the calliper mount.
Please make sure what forks you have before purchasing this calliper hanger

Swing arm 25mm raising links - $105.00 - Sorry guys, unavoidable price increase.

Links - 6061 T6 Aluminium, Anodised.
Bearings, seals and bushes are NOT included

ABS sensor bracket(Old Style) - $25.00

Bracket - 2mm 304 Stainless Steel
Bolts included

ABS sensor bracket(New Style) - $35.00

Bracket - 6061 Aluminium
Bolts included

Cable Guide - $30.00

Cable Guide - 4mm Stainless Wire

Hooter Bracket - $15.00

2mm Stainless Steel

Fender Support Bracket - $30.00

As you can see the mounting holes have been updated to include the BMW lower clamp holes. So the support bracket can now be used to strengthen the fender on an OEM BMW front end and a Yamaha converted front end

2mm Stainless Steel
Hooter and Fender Bracket Installation Guide

8mm Neck Spacer with bearing cover - A$30.00

I want to keep this post as simple and clean as possible. Any further info required please don't hesitate to contact me. PM or email

For those who have already purchased, please feel free to add any feedback below.
And pictures of your installations please. Lots of pictures.


Aquatic screwed with this post 12-26-2014 at 05:26 AM
Aquatic is online now   Reply With Quote