View Single Post
Old 05-28-2014, 10:40 PM   #31
gefr
Life is a trip
 
gefr's Avatar
 
Joined: Nov 2005
Location: East Med, Greece
Oddometer: 3,707
I replaced my TPS with a used unit.

The bike is definitely rideable, but there is a snatch at openings from idle, that was not there, at the last days of the older, now faulty TPS sensor. There is also an occasional drop of idle at 1100rpm for a short time. I never have the motor stall.
I want to emphasize the voltage is adjusted at 0.67Volts at idle, to get it running properly. I have installed ITG foam filter and the bike is 2006 European. Another friend that also installed CPR foam filter has TPS adjusted to 0.72Volts on a 2009 - 115hp Adv bike.
I believe foam filters need higher voltage at TPS.
I also believe TPS should be adjusted accordingly on each motorbike, starting with the recommended settings, but not sticking to them too meticulously.
Cheers.
__________________
There is always a reason!!
Fuel filters Fuel pump
Aluminum base plate for ITG foam air filter
Clutch master cylinder resleeving
Out of office 25 till 4th August

gefr screwed with this post 05-28-2014 at 11:13 PM
gefr is offline   Reply With Quote