View Single Post
Old 08-26-2014, 11:54 AM   #970
Ian B OP
Fairing Manufacturer
 
Joined: Oct 2004
Location: BC
Oddometer: 585
Quote:
Originally Posted by GillaFunk View Post
Ian,
With the Lynx, if running each light is 35w, wouldn't that make running both at the same time draw75w? Does running the bulbs at high or low change the draw?
Each lamp is different . The low beam lamp remains on all of the time and is drawing 35w. When the Hi is switched, the Hi comes on in addition to the low, so you have both lights on and the draw is 70w.

No bikes have a problem running this as the draw on low beam is actually lower than stock and there's no problem powering the 70w for the periods of time a Hi beam is normally used.

Ian
__________________
www.britanniacomposites.com
Ian B is offline   Reply With Quote