"Remove tank, disconnect everything attached to the carb, pull back airbox boot, pull carb back out of intake spigot, pull carb out thru the top between frame rails."
Easy as Creeper describes above, abit tedious but not that hard to do.
BUT be sure to refit choke cable to carb before refitting carb into boots. Was esay enough to take out But DAMN! was bitch to get the plastic piece re threaded.
!!!AND make sure to stuff a rag or baggie over boot on motor. BECAUSE if the jet comes free of the cable and falls off and lands on the edge of the boot pecariously ready to fall into the motor! WHEW that would really really suck!