View Single Post
Old 08-03-2006, 06:24 AM   #2
Studly Adventurer
Joined: Aug 2005
Location: Annapolis Mary-Land
Oddometer: 606
I think there has been a crap load of info about Jetting. Based on my reading and my personal jetting (I have a Sm610), I came up with the following.

180 Main
50 Pilot
Fuel Screw 1.75 turns out (minimizes decel popping and idles good)
JD Red needle at #5 position for the clip
Leo Slip on
Iridium Plug

Runs like a champ. Pulls hard and clean from Idle to redline.
I am in the sea level to 3K regime with 70-90 degree temps 60% humidity.

Very Happy with the 610, a great all around bike.

Maybe it should be organized into subgroups something like:
Valve adjustments
Maint Tips

Something along those lines. Alot of guys make cool things for their bikes and it would be nice to have them posted for others to see and to give them ideas.

firebolter screwed with this post 10-19-2007 at 08:34 AM
firebolter is offline   Reply With Quote