View Single Post
Old 09-28-2006, 01:54 PM   #2
Wandering Soul
gaspipe's Avatar
Joined: Jul 2004
Location: Pickwick Lake, Tennessippi
Oddometer: 11,354
Originally Posted by alpiv
I was our riding and had to turn around (missed a turn), turn the bars to the left to make a left turn, felt resistence and as I cleared the resistence, the bike shut off.
Turn the bars streight, it would start and run fine. Yet when I turn the bars far left, about the time the keyswitch would pass the frame it would shut off --Like I was grounding the system out.

Anyone else have this problem ?
Wonder if the ignition switch leads pulled out of the soldered contacts.

It happened to me on the CD Ride. Check the pigtail coming from the bottom of the switch. It's about a foot long, and goes into a molex connector on the right side fairing brace.

LVR resoldered them in the field.

Check it out and let us know.

gaspipe [the original]

Hair of the dog that bit me, Lloyd...
gaspipe is offline   Reply With Quote