03 models check your reduction jet
I have been following this thread and decided to check my reduction jet.
removed the slave cylinder , chain guard/guide ect removed the M8 blanking bolt , i then unscrewed the brass screw which sits at the bottom of the hole, finally using the vacum cleaner with some reducing pipe i got the little bugger out, Guess wot NO OIL HOLE .
All 03 models had a brass plug pt no 600.038.027.000 this should have been replaced with Reduction jet pt no 600.38 029.000 as part of scheduled service it is suposed to improve clutch function .
My machine had all of its servicing work done at Red Line up untill the waranty ran out . Mileage to date is 20000 miles also on origional slave cylinder.
I will be over to Red Line first thing Monday morning .