View Single Post
Old 02-25-2007, 04:34 AM   #10
Boon Booni
Red Clay Halo
 
Boon Booni's Avatar
 
Joined: Aug 2003
Location: Richmond, Va
Oddometer: 12,853
As for the dremmel method, you may have to cut many grooves to get it to release.. If you cut one and try to wack it nothing will happen, as what you are doing is forcing the bearing to expand outward from the cut but the hub will give the bearing support and no crack will happen. Several deep cuts around the perimeter will give you better results.

Just be careful not to cut into the hub.
__________________
A little nonsense now and then is relished by the wisest men.

You can be Han Solo, and I can be another Han Solo...
Boon Booni is offline   Reply With Quote