View Single Post
Old 04-17-2007, 09:50 PM   #4
gunnerbuck
Island Hopper
 
gunnerbuck's Avatar
 
Joined: Nov 2005
Location: N.V.I, B.C.
Oddometer: 3,752
Great post, but a word of caution: On LC-4 engines with the Kokusan 4K-2 ignition it is recomended to use a flywheel holding device rather than the crank locking screw to tighten the flywheel nut. The 120 LBS torque required could damage the crank web. It's ok to use on the LC4s that only require 44lbs torque on the flywheels.
gunnerbuck is offline   Reply With Quote