I have Unabikers and it wasn't that bad. Just do not tighten anything up until all bolts are started. I installed mine on a Saturday morning. If I remember correctly, I had one problem with the right hand upper bolt rubbing a line but I put some adhesive fuzzy velcro down on that part. I also had to wallow out the holes where the plastic radiator shrouds lower screws go in but the dremel took care of that quickly too.
Originally Posted by vegasmick
l've done some reading up on the 2 guards(Unabiker & Flatland)& it seems the Unabiker is the better of the 2,but a real bitch to fit!!!!
Now it took me 2&1/2hrs to fit the Flatland(biggest problem was remounting the horn!),so if you do get the Unabiker model,stay home Friday night,no beer,early to bed,& dedicate the whole of Saturday to fitting it,& then you've still got Sunday if you mess up!
Good luck Bear,Mick.