View Single Post
Old 10-12-2007, 12:15 PM   #15
Motorcycle A.D.D.
ebrew's Avatar
Joined: Nov 2005
Location: Denver colo
Oddometer: 1,411
just wondering about the Beringer Radial Master for brakes and clutch. do you have a part numbers and how did you mount the res. thanx erik

Originally Posted by GSpot 1200
I like the Scorpion Sync, except in rain, they are not confident in rain.
regarding the front fork, itīs the BMW axle, I just put it in from the other side, and made a new spacer to the right side of the fork, then I reduced the disc, from 305mm to 300mm, and fitted a KTM 950 Adv. caliber.
Later on I will do a bracket, so I can use my 6 piston ISR
caliber, with the 320mm disc, but I think that it will
brake " too much" with that setup.
I brakes so perfect now, that I find it hard too see, how it
can brake better than now.
I can highly recomend the Beringer Radial Master
for brakes and clutch, its way better than stock,
my clutch is like soft butter, and smooth as silk.
ebrew is online now   Reply With Quote