View Single Post
Old 12-22-2007, 01:57 PM   #6
Upward and onward!!
Boatman's Avatar
Joined: Mar 2005
Location: Petersburg, NY and Mill Spring, NC
Oddometer: 10,393
I made up a set from 10ga silicone jacketed wire. There is a pigtail coming directly off the battery and connects with 40 amp Sermos connectors. When I don't need the jumper cables the pigtail powers my auxillary fuse block. All parts came from McMaster Carr. The silicone jacket is good in case you overheat them, it will not melt.

It's a good idea to solder the connection to the clips instead of depending on the cheesy crimp that will promote high resitance in the connection.

I've jumped by buddies R80G/S a number of times from complete dead with no problems.

08 KTM 950 SE, 09 KTM 950 SE, 04 KTM 950 ADV, 10 Husaberg FE390, 66 Kawasaki B8S Super 150

Hi/low beam conversions for: Trail Tech, Baja Designs
Boatman is offline   Reply With Quote