View Single Post
Old 01-15-2008, 05:50 PM   #23
rapiti
IOR Veteran
 
rapiti's Avatar
 
Joined: Mar 2003
Location: On the island
Oddometer: 1,899
Cheap that I am, I bought a puller set from HF for $6.99, and scrounged up two 6mm bolts from old bicycle stems. I have been very buy with other stuff, so I simply bought the sprague clutch from Munn's. With the $60plus in the sprague clutch, I ma going to have to drink some to equal Losiu's beer/parts ratio!

I will tackle this project when the parts arrive...

Quote:
Originally Posted by losiu
Sorry for not replying earlier but I thought you got enough info on the puller. The one I used was made just to fit the thread and it doesn't even look like the little, tiny thing that KTM uses.

The beer was actually German, but I'd go for Chech if I had that choice.
You can check out the proper Polish beer right here.
http://www.youtube.com/watch?v=YAVtfHa_HGw

Good luck. Post the results (of both drinking and fixing the bike)

L.

PS. Rapiti, I think you're needed on the wheelie thread...
__________________
...its the best paint scheme that has ever been or ever will be on an Adv...-AussieRob
rapiti is offline   Reply With Quote