I need to get the shocks for the next run coming. I would like to have them by late next week. Depending on when they get here, a two week turn around is likely (it could be a little better). Please get with me quickly if any of you would like to be part of the next built. I have 2 more to put together from this first build. a couple others are shipped.
Eugene's sag is close on the rear but the unloaded sag is too much, indicating a stiff spring. Also by PM I found that the spring preload is only at about 8mm. For a spring of that length we would expect to see 15-20 mm preload. All that is is another indicator of the spring rate.
Cogent Dynamics Inc.