I was up on twisties this weekend and the bike only has 4008 miles on it. At the end of the 120 mile ride I noticed the up shifting took on a slightly different feel, in that it took two clicks to upshift one gear. Normally it's only one click. I took out the jet and sure enough, clogged! Blowing into the jet did not unclog it so I needed something else. I didn't happen to have a .010" wire laying around, but I did have two .005" wires which I twisted into a pair and that unclogged the hole. Took it for a test ride and it shifts in one click.
In the future, I will buy a High "E" .008" or .010" guitar string to poke out the hole without removing the jet. Turns it into a 10 minute job to be preformed every other month.
Why a guitar string you ask? Spring steel, wont break off and available everywhere.
Moraflex screwed with this post 04-12-2008 at 11:32 AM