I'd be happy to work on the fairing for you.. but... Unless you can get a group order of 10 or more.. it's pretty much a custom job. and price would be what time and materials I would have in it..which would more that the cost of the XR fairing.
next is aquiring a bike that I can mock up. I would need it for at least 2 weeks or more to get the fitment right.
My dream bikes that I'd like to make these for are:
CRF 450 X with the acerbis 4.75 gallon tank
2008 exc 450/530 with acerbis or aqualine 24/27 liter rally tank
WRF 450 w 6 gallon acerbis tank
If anyone wants to drop these bikes off for a few weeks at the house for a mock up.. I'd definately work out a deal on a fairing.
I've been working on a prototype using the 950 adverture headlight that Jim has sent me.
It really has potential to look good. I only worked on it a few minutes last night and did a rough cut in on the old r&d fairing it fit pretty easy.
going to tweek a few things:
1st is get the fitment correct
2nd extend the fairing to be a little taller to maybe 3 to 4" for more wind blockage.
Here's the picture of the really rough (really rough) mock up.