View Single Post
Old 04-25-2008, 05:53 AM   #1250
Tuscan rider
tagesk's Avatar
Joined: Jun 2007
Location: Tuscany, Italy
Oddometer: 3,229
Originally Posted by motoreiter
As I understand it, you only need to undo the security screws if you intend to remove the bad EWS and replace it with the new EWS. This is a permanent fix.

On the otherhand, for a temporary fix, you only need a Torx 10 wrench: keep the bad EWS in place, unplug the connector, and plug it into the new EWS, which you zip-tie near the ignitiion...

Is that correct?
Correctr. And you can check out what it is supposed to look like in the GSpot FAQ.

'02 R1150GS - Adds life
My Riding in Tuscany-thread is here.
Renting out motorbikes in Toscana, Italy
Proud contributor to Wisdom and GSpot FAQ and European Ride Report Index.
IBA: 33616
tagesk is offline   Reply With Quote