ADVrider - View Single Post

johno · 10-23-2008, 11:16 PM

Skibum, if you use the Yamaha bearing kit, you dont have to machine the shaft. The BMW, and Yammy have the same size outer cup diam.
I used the Yam bearings on my GSPD conversion, and the GSPD has the same bearings as the 650GS/Dakar.

10-23-2008, 11:16 PM	#2
johno Beastly Adventurer Joined: Dec 2007 Location: Mount Gambier, South Australia, Australia. Oddometer: 2,893	Skibum, if you use the Yamaha bearing kit, you dont have to machine the shaft. The BMW, and Yammy have the same size outer cup diam. I used the Yam bearings on my GSPD conversion, and the GSPD has the same bearings as the 650GS/Dakar. __________________ Down in the land of the confused(mainly me)