Thread: Flexing my ABS
View Single Post
Old 12-02-2008, 11:29 AM   #27
Where fun goes to die....
DSM8's Avatar
Joined: Aug 2005
Location: Glendora, Ca
Oddometer: 4,067
What I did while riding off road for the weekend was just put a couple washers between the sensor and the housing onthe rear wheel. Moving the sensor away from the ring by just that small amount made the signal unreadable and the ABS was off.

To under just remove the screw and put the washers on the other side outside of the sensor and your done.

No cutting into the wiring harness and takes only couple secs to do.

The really cheap penny trick.

DSM8 - A different kind of mean
SQL > SELECT finger FROM hand WHERE id=3
DSM8 is offline   Reply With Quote