ADVrider - View Single Post

kliff · 12-04-2008, 12:31 PM

ot the front hub/wheel assy back from Bob at RTR, http://www.rtrwheellacing.com/index.htm

$200.00, NEW Excel 2.15 x 18 rim, NEW Buchanan spokes, and return shipping! All I did was send Bob my bare hub, and a week later, I'm hooked up...CHEAP! Bob will be getting all my wheel conversions...

Mounted the Kenda270, 4:00 x 18 tire, and reinstalled evrything back on the DR. DO NOT, I repeat DO NOT use the 4:10 x 18 Kenda270. The 4:00 clears the fork gaiters on each side by 1/8th of an inch. I doubt the 4:10 would fit without removing the gaiters. Even with the 4:00, it is necessary to rotate the lower clamps at least 90 degrees for tire clearance.

12-04-2008, 12:31 PM	#7
kliff ^OP Retired Ole Phart Joined: May 2007 Location: Grovetown, GA Oddometer: 1,119	ot the front hub/wheel assy back from Bob at RTR, http://www.rtrwheellacing.com/index.htm $200.00, NEW Excel 2.15 x 18 rim, NEW Buchanan spokes, and return shipping! All I did was send Bob my bare hub, and a week later, I'm hooked up...CHEAP! Bob will be getting all my wheel conversions... Mounted the Kenda270, 4:00 x 18 tire, and reinstalled evrything back on the DR. DO NOT, I repeat DO NOT use the 4:10 x 18 Kenda270. The 4:00 clears the fork gaiters on each side by 1/8th of an inch. I doubt the 4:10 would fit without removing the gaiters. Even with the 4:00, it is necessary to rotate the lower clamps at least 90 degrees for tire clearance. __________________ kliff NASRA / MAXX Racing http://nasra.proboards.com/index.cgi Scooter Rebels http://scooterrebels.proboards.com/index.cgi 49cc Scoot http://49ccscoot.com/ Peace, Eagle, as long as it's a BASHAN, it's cool with me!