View Single Post
Old 12-28-2008, 04:57 PM   #99
Island Hopper
gunnerbuck's Avatar
Joined: Nov 2005
Location: N.V.I, B.C.
Oddometer: 4,346
If your talking sealant for the little cover, it has a gasket so none should be required... I usually reuse the gaskets 2 or 3 times before replacing with a new one and they have never leaked.... No loctite is called for on the decompshaft allen screw but a little grease on the O-ring shouldnt hurt...

As for the rocker cover itself I have had better luck using the ThreeBond 1211 over the Hondabond stuff for some reason.... The Hondabond goes about 5-10 K before it blows out and starts leaking at the front of the cover as to where the 1211 hasn't failed me yet even at double that milage....
gunnerbuck is offline   Reply With Quote