View Single Post
Old 01-19-2009, 03:30 PM   #3
FlyingFinn OP
Beastly Adventurer
Joined: Jul 2005
Location: Los Gatos, CA
Oddometer: 1,123
Originally Posted by mark1305
...stand next to the bike and with both hands on the top rear of the tank, suddenly push down with about 2/3 of you rweight and release. Both ends of the bike need to rebound evenly. And the rebound travel should take somewhere between 1/2 and 1 second. Closer to the 1/2 second, but a perceptable damping of rebound speed.
I've done that too but I guess I don't have accurate enough eye to judge the rebound. Both ends evenly and in under a second... I have hard time "seeing it".

But that tip also kind of tells me that the rebound really is set to match the springs, not so much per riders weight.

FlyingFinn is offline   Reply With Quote