View Single Post
Old 01-27-2009, 11:33 AM   #27
ZenMoto
Bikeslut
 
ZenMoto's Avatar
 
Joined: Jun 2005
Location: Moorpark, CA.
Oddometer: 671
Quote:
Originally Posted by Hodakaguy
Whats your light doing? Is it just dim/yellow? I'm running a single 100W AC leg to my 8" light with a 100W bulb and its extremely bright. ???

Hodakaguy
Basically, besides the flickering, it is just dim and yellow, as you said. I think the stock Baja Designs "DS kit" light put out as much light. My setup for that leg is currently 100W lead -> BD AC rectifier -> high voltage toggle switch (bar mounted) -> 8" race light. There's really nothing in the circuit to sap power, and even at consistant revs the light never gets really bright.

Originally I had the 100W bulb in there and thought the 100W feed might not be putting out enough juice to fully energize that bulb so I put in the 55W, but am getting basically the same amount of light. :(

So at this point I'm a little torn. I'd like to have the DC power and battery so my tail light stays on if the bike stalls, etc., but really am tempted to just chuck it and run the whole system AC.

...thoughts?

Thanks,
D
__________________
"If we do not find anything pleasant, at least we shall find something new." -Voltaire
---------------------------------------------------------------------------------------------

Save $5 on a photo hosting accout at
https://www.smugmug.com/signup.mg by inserting cupon code R1bXVzHCYtHts
ZenMoto is offline   Reply With Quote