Here is mine. I had my sticker guy print up a pattern print on I think 14" wide 3M laminated stuff. This is standard MX graphics material. It is what I have on my dirtbikes and what I get stickers made from for suspension. I made templates with butcher paper and a crayon. I rubbed the crayon on the edges and they make a perfect pattern of what you are trying to copy. Then you transfer the shape to the real deal, cut it out and fit it. Lots of windex, heat and time. It took most of an afternoon to install the decals. But they are holding up great 2 years later. This photo is soon after the install.