View Single Post
Old 03-20-2009, 12:51 PM   #1
cjracer OP
AWD please!!
 
cjracer's Avatar
 
Joined: Sep 2005
Location: Mukwonago, WI
Oddometer: 3,951
CJDesigns Footpegs

We are running a Fall Special on CJ Designs LONG BLACK KTM Foot peg Extensions to help TEST out the NEW SITE.

Perfect for all those naked 950/990 Foot pegs out there.

These are NEW - NOT blemmed.

Promo offer $100 a set. Limited to stock on hand. First come, First Serve!

Order 3 sets or more - FREE Shipping in the USA, 1/2 off shipping outside the USA. Gets your buddies together for a group buy. This won't last long!

Retail $140 a set.

*Shipping will be refunded when I process the order. You MUST put your ADVrider name in "Business Blank"

CHECK IT OUT.
http://www.cjdesignsllc.com/products...peg-extension/

Thank you,
Craig



PIVOT PEGZ MK2 version are ready to ship. BLACK/ ORANGE and Machine Finish. Email me w/ your color and length choice. Same price as KTM version.
These fit on all bikes w/ Pivot PegzMK2 brand Pegs only. Will Not work with the MK3.

We have MK2 combo packs instock.


Long and Standard size pegs in BLACK, ORANGE colors are in stock ready to ship!!!
(mention ADVrider and give me your advrider name if your email me to get this discount.)

Originally I made these with out stainless pins. The Aluminum faces wore out faster, and lost there grip over time. They we also more slippery when wet. I updated the design to include Stainless steel pins to offer great grip with out ripping up the soles of your boots. I now have over 60,000 miles on my first set.

These extenders increases the size and length of your stock KTM footpegs.



You can even keep the stock rubber dampener in if you prefer to use those for extended freeway trips across the plains.

My size 12 boot was always sliding off the pegs and rolling in rough terrain, not anymore. These have been ergonomically designed to offer support and control of your motorcycle.



Some aftermarket pegs add width at the cost off limiting the amount the peg can flex up in a crash. That can cause a broken frame tab and an expensive repair bill. I've machined my version for clearance to allow maximum flex, just like the stock pegs.

Shown here: http://www.advrider.com/forums/showp...6&postcount=54



Two options will be offered.

1) Drill 3 small holes in each pegs yourself and install hardware for the cheapest price.

2) Send me your pegs. ($40 drilling charge) If I have extra pegs in stock I'll send you a set ready to install w/ preset springs and new cottter pins. Then refund the "Core Charge" ($80) when your set arrive to me.

These work on KTM pegs with
PN
590.03.041250
590.03.040250

Pictures of pegs lengths are here.
http://www.advrider.com/forums/showp...9&postcount=62

Prices for DIY pegs kits.
Retail:
LONG $140

Standard $130

Anodizing- Orange, Black.

Plus shipping

If you need pegs too, price will depend on how much I have to pay for them. Contact me for info on what I have in stock.

Sending in your pegs to me to drill is an option too. Add $40.

Optional sizes shown here.
http://www.advrider.com/forums/showp...9&postcount=62

Comparison pics shown here:
http://www.advrider.com/forums/showp...&postcount=111

Don't chance breaking your frame mounted peg tabs like other wider pegs can, it's not an easy or cheap fix. These have a built in a safety release so that won't happen.

Thanks,
CJ
__________________
My 2006 950S thread. 2006 950s update
New product updates here! Wordpress BLOG
click www.cjdesignsllc.com for the full line of products. FREE STUFF!!

cjracer screwed with this post 10-18-2012 at 08:46 PM
cjracer is offline   Reply With Quote