Originally Posted by cjracer
I've never ridden w/ a set of Fastways, a taller seat and bar risers keep my feet up as high as possible.
The extra drop is a big plus in those, I'll see what I can do. Next time I'm at the MC shop I'll see if they have a set to look at.
One thing, as you go wider the easier it is to scrape the pegs in corners, going lower adds to the problem too. Once you grind off your one piece steel units, your stuck buying another set. W/ these, if you wear them out/grind them down you could swap on a new set to the existing pegs.
That's all I have for now.
If your open to make'n some for the FastWays, I'll ship ya some to take a look at and work on.