View Single Post
Old 05-28-2009, 12:35 AM   #76
DRBImagery
Have cameras, will travel
 
DRBImagery's Avatar
 
Joined: Mar 2009
Location: Alberta Canada
Oddometer: 65
I would call them, they are very good at the tech stuff on the phone,,,my system is totally different from yours in how its wired, sorry.



Quote:
Originally Posted by *Ck*
hey drb, where about in alberta are you?
I just picked up the same kit, vancouver Supermoto right?

Anyways, i'm having an issue with my headlight ( not working) let me explain:

HAve 200w stator spit into 2x100, 1 ac system for headlight, 1 dc system for everything else, dc system is workin perfect.
The ac system gets power through a single wire that goes from one of the stator coil wires to the stock ac regulator that was replaced with a dc one that came with the kit.
So...power from stator plugs into the positive (white/yellow) on the regulator and then from the positive dual female end a wire goes to power on headlight.
theres a wire from the negative on the headlight that goes to a negative on the ac regulator and a wire that grounds to the frame from the negative dual femal end.

Now, from what i've been reading i need to "float the ground" (ie. take it off), will this solve my problem?

cheers

Ck
DRBImagery is offline   Reply With Quote