Hi All, Can somebody tell me what is required for fitting a high fender to a 990 ADV? I believe the 690R/950SE fender is the part to use, right? I already have a spare one of those... just wondering what else is required beyond the fender itself TIA
Worked for me, got 3 pages of results. Try here: http://www.advrider.com/forums/showthread.php?t=729897&highlight=High+Fender http://www.advrider.com/forums/showthread.php?t=350360&highlight=High+Fender http://www.advrider.com/forums/showthread.php?t=786055&highlight=High+Fender
Thanks guys... A few people have mentioned search not working recently http://advrider.com/forums/showthread.php?p=23405310
It works just fine if you don't confuse it - single word searches are best. Alternatively you can do what you did and we'll post results...but we might just bust yer balls a little along the way.
Geez you guys are getting mean You could say "Go Search!" to almost anything at this point as in some context it has all been covered... I did exactly what this guy did a couple years ago and could not be happier with it. I even used the same part numbers. I did move the brake lines outside the forks but that seems to be a personal preference more than anything else. http://www.ktm950.info/how/Farkels/adventure/high fender/990/990_high_fender_kit.html
I bought Taurkon's parts list a month or two ago and did the install. I used two of my old screws in addition to the ones in his list. Be prepared to use a heat gun on the male slider fork guards to get them to bend to fit the mounting points on the 990 fork ends. Oh yeah, and I drilled a couple of extra holes for those extra screws. If you would like a picture of the area described above, let me know and I'll take and post one. I am very happy with how it turned out. I owe Taurkon a beer or three.
These are the exact parts i used. Bought them from my local dealer.I did not use all the screws. but hey i always have a screw loose. I did not need a heat gun for the fork protectors. and i am running the brake lines inside the forks. 1 7650801000030 KTM 690 Enduro Front Fender Black 1 4700109400030 FORK PROTECTOR L/S R/S 85SX 03 4 59001092050 SPECIAL SCREW M6X12.5 WS=8 . 4 0014060203 HH COLLAR SCREW M6X20 WS=8 4 54808020000 SPACER BUSHING 2 60013025100 - BRAKE HOSE GUIDE FRONT 03 2 60013025050 - RUBBER FOR BRAKE HOSE GUIDE03