Which High Fender.

So... which fork guard has the brake line clamp on both sides? It doesn't look like the SX85 has that.

I don't think any of them do honestly. Someone correct me if I am wrong.

$59 shipped from MC Superstore--Acerbis SM fender and 85SX fork guards.

FWIW

From the pictures posted, it appears someone figured it out.

From what I gather the pictures show where folks have either attached a holder removed from another fork protector(glue etc) and/or bolted the "cap" that can be bought through the fork protector without the "base". I would love to hear from someone who has done it as I would certainly buy fork protectors with the guides on both sides if someone can provide some insight.

Anybody done this on a 950 with bar risers?
I have an '04 with 2 inch ROX risers on it.
PA do you think the break lines you've listed would still work?
1 60013012300 Front Brake Line
Thanks for the help!

I have a 2005.5 (shortest) 950 with a 265mm suspension upgrade & high fender - for this I have the extra brake line from the TT high fender kit. I also have a 2" RallyConnex riser. This is a total of 4.2" rise from the stock handlebar height - compared to the calipper mount.

With the TT brake line going down the left, and the stock (non-S) line going by the right fork leg, it's a tight fit, but it works.

Thanks for the info!
Awesome looking bike.
Do you have more picks of that faring and light setup posted anywhere?
Thats pretty sweet!

Thanks!







These were taken when the bike still had the stock suspension:

I also done the high fender conversion on mine, and just because it looks lame with the standard fender!


Sent from my iPad using Tapatalk