Rocky Mountain Most Wanted

Where is E Kalirado?

Havn't tried that one - yet. Looked through a couple similar papers and have a couple auctioneers lookin for me.

Hugo. Middle of the flat side of CO

Barron street in Hugo is named after my great-uncle, J.W., or Cap Barron. He was the sheriff of Elbert Co. during the late 1800's and some say he was the first resident of Hugo.

Looking for a late 90s-2005 YZ125 roller for a WR200 motor-swap project. Complete (but no motor or blown) is preferred. Steel frame. Cheap is preferred. Thanks

I've one guy I got a quote from, but didn't get around to doing the job last fall. I may likely use him if I can get scheduled, but I'm always open to other known contractors. It is going to get done this spring..............

Looking for quality concrete guys that can do a retaining wall as well as flatwork.

Friend of mine who does good work.
https://plus.google.com/117678524147503536391/about?gl=us&hl=en
Devin

I know this is a long shot but dose anyone have a stock 1800 Goldwing seat they want to sell ?

I'm looking for a 110/80-18 knobbie. Prefer DOT but still pretty dirty. I have 4.10 on now, but that's really too wide for this XT350.

Looking for either an R or L model, it will need to be plated in New Mexico anyway.
Let me know what you have, or have seen...

Thanks

$1200. CR85RB from '04-07ish would fit the bill nicely.

I need the rear corbin seat for a 2000 BMW R1150gs, thanks

I missed another one by only a couple of hours today.. Thing was in top shape.

I'm seeking one out now. Cash in hand. Preferably a runner with mostly original parts.

Long shot - but worth asking. Looking for a USPS/Stamps.com compatible thermal label printer. Anyone have one you want to part with?

Any printer should work. I'm using a cheap Canon inkjet. You just feed it labels instead of paper. I have a Xerox XE80 laser printer that needs some sort of fixing (one side prints too dark, ) if you want it. (I think I still have it...gotta look) This is a thermal fusing process as opposed to the inkjets spray and dry process. Very solid on high gloss stock.

Yeah - I have a Canon inkjet as well. I was thinking in the long run that a thermal printer would be cheaper. My Canon goes through ink pretty fast :/

Mine does too. Got a refill kit and just keep refilling the black with the included syringe. Don't use the colors. The jets in the cartridge are holding up fine after 4 fills and the printing is crisp. Interested to see how far it will go. makes for some real cheap printing.

I need one.

Also in the market for Klim Traverse gear.

That's a good idea. Just need it for black really anyway, and refilling the cartridges is probably way cheaper than buying new ones.

I am not real picky about brand. I need one for backup. Interested in small, medium and large.
Thanks

email is best. Ron at wdsma dot com