School me on bar end weights

Jamm · Aug 6, 2012

Hello Fellows,

I know that bar end weights reduce vibration but what determines how much weight is required? Do both weights need to weight the same or can they differ a bit?

In my instance I have HDB handguards with their weights, but want to add a Kaoko cruise unit. I have a Kaoko unit already however, they do not make one that fits HDB handguards on a F800GS. I'm wondering if I cut the cruise unit down to size and it weights less than the opposing bar end weight if it will cause adverse vibrations.

Has anyone done this?

mustardfj40 · Aug 6, 2012

I am newbie myself but on my F650GS I have the BMW hand guards which came with a new replacement set of bar end weights and Kaoko throttle lock, it vibrates at highway speed. The Kaoko only goes on the throttle side.

sorebutt · Aug 6, 2012

I've played with bar end weights on other bikes and they do help a lot. The only difference you should notice with only one is more vibration, especially on the throttle side. You might try something like bar snakes that go inside the bars to reduce vibration.

JRWooden · Aug 7, 2012

I have the BMW handguards and was recently told the weights that come with this kit are lighter than the OEM weights...
I have not had time to check that to find out if it is true...

Here are two folks that play in this area:


[FONT=&quot]http://www.vibranator.com/[FONT=&quot] (associated with Richor)[/FONT][/FONT]

[FONT=&quot]http://www.barsnake.com/[/FONT]

[FONT=&quot]Also some folks say they put lead shot inside the ends of the bars...
On the F658GS the bars are plugged close to the ends so I'm not sure how that works....or if it works...

Some discussion here as well: http://www.ukgser.com/forums/showthread.php?t=136903&page=2

[/FONT]

FredRydr · Aug 8, 2012

JRWooden said: ↑

On the F658GS the bars are plugged close to the ends so I'm not sure how that works....or if it works...
Click to expand...

Bar end snakes cannot be inserted into these OE BMW handlebars.

Fred

SCFoster · Aug 8, 2012

The issue with handlebars is that they can act like a tuning fork, thereby causing numb hands. The purpose of the weight is to change the resonant frequency characteristics of the bar and the location where the vibration is least to where your hands are placed.

In plain english the amount of weight required is the amount that works (statement of the obvious). It really can be hit or miss. Moving the bar slightly from side to side (one side ending up being slightly longer than the other) can also have an effect (good or bad). I wouldn't stress too much about weights being different on each side. If you don't notice anything wrong, then you're good to go.

GeckoRider · Aug 8, 2012

Jamm said: ↑

Hello Fellows,

I know that bar end weights reduce vibration but what determines how much weight is required? Do both weights need to weight the same or can they differ a bit?

In my instance I have HDB handguards with their weights, but want to add a Kaoko cruise unit. I have a Kaoko unit already however, they do not make one that fits HDB handguards on a F800GS. I'm wondering if I cut the cruise unit down to size and it weights less than the opposing bar end weight if it will cause adverse vibrations.

Has anyone done this?
Click to expand...

Please post back on how this works out if you go ahead. I am in the same boat with HDB (love), and have been using a throttle rocker only. I guess swapping out the handle bars to something that could use a snake would be an option if the vibes are really bad. . . Damn slippery path when one farkle leads to another, etc. . .

Log in or Join

School me on bar end weights

Jamm Old man on 2 wheels

mustardfj40 Been here awhile

sorebutt Long timer

JRWooden never attribute to malice...

FredRydr Danger: Keep Back 300 Ft.

SCFoster It is what it is Supporter

GeckoRider Been here awhile

Log in or Join

Useful Searches

School me on bar end weights

Jamm Old man on 2 wheels

mustardfj40 Been here awhile

sorebutt Long timer

JRWooden never attribute to malice...

FredRydr Danger: Keep Back 300 Ft.

SCFoster It is what it is Supporter

GeckoRider Been here awhile