Rock Hard Rally Gear. KTM LC4 and LC8 rally bash plates. (Australia)

Hey mate, how much for one of the pannier racks and a bashplate? Looking to buy in the next month or so.

Hi DucatiSoc
The bash plates are $650.00 and if you want a set of racks as well Ill do the racks for $150.00 and you can paint them or get them powder coated your self.
I can post them down to you thats about $35-$50 at a guess or you can make a day of it and come for a ride and pick them up.

Cheers Matt

Stage 1 prototype KTM950 SE bash plate.
Hear is the 950 SE bash plate so far.

This one will have a tool box and water tank built in.

Its real hard builbing bash plates with out the bike to work off.

looking sweet

just received stage 2 of the 950SE bashplate with the tool boxes :eek1
pics coming soon. stay tuned SE owners.

top job matt PM sent.

this is how you build a bash plate with out the bike in front of you.
KTMATT
(matt & i are a good 1,000 klm apart)

this template bash plate has clocked more KLM's in the post than my SE on the road

DROP TO CLEAR HOSES:


TO SHORT AT REAR:


REAR MOUNTS HERE:



















had to cut out a piece to clear the water pump. just needs filling , lid trimmed to suit , rear mounting tabs added & powder coating.

Have you ever made one for an LC8 Adventure

pom give KTMATT a private message. he's a busy bloke as being a tradesman & working for himself but a top guy to deal with.

as far as i know this is the first (template) that matt has done for the LC8.
with little modding at the front mounting it would fit the LC8 ADV.

this will be on its way back to matt after chrissy. i'd say he will need your OE plate to get the front mounting points sorted to fit. if he does do one.

MATT

rear mounts are spot tig'ed in place & bolts up nicely with ample oil line clearance.

it's in the post on the way back mate. you have PM.
call me if need to or i can call you. let me know.

cheers.
P.S if i dont here from you before have a good safe chrissy & new year. that goes for everyone stay upright & safe guys.

Stage 3

Added more clearence near the oil tank and water pump and made the boxes bigger.

A bit more shaping and it should be right

Its much easier to do when you have a bike to work off and not have to send it about 1200km just to see if it fits.
Thanks to veetwo tls and Beven

Do you do replacement lids? Lost the left side lid....mmm dont ask how it happened.

http://i303.photobucket.com/albums/nn130/Mulga_2008/P1020603.jpg?t=1212466566

looking good matt

hi Matt,
are you still doing the 640 adv rallye plates? if so what's the current price for one, and what is the turnaround time?
one of the previous replies mentioned he had the carbon tank guards from Chris barnes, i've also got these so the left hand box needs to be a little shorter to clear the guards and fuel tap, have you built any for this set up yet?

cheers

Hello,
I was also checking to see if you are still making the engine guards for the 640 adventure- I am located in the US in Arizona if that matters. please let me know and thanks for your time..

any more progress on the SE bash plates matt ?

KTM 950/990 Adv Rallye Bash Plate