Touratech USA: Zega Pro Pannier & Top Case Systems + Soft Luggage (Giant Loop & more)

Greetings ADV,

We will be highlighting and describing our Zega Pro Pannier System for various ADV bike.
We will also show our offerings for soft luggage, tank/tail/travel bags and dry bags.

We welcome any and every question or inquiry.

Touratech USA ADV Vendor Thread:

ADV Vendor Thread

Product Line:

Pannier Systems
Top Case Systems
Racks
Luggage Accessories
Optional Case Locks

Videos:

Zega Pro Pannier Systems
1200 GS Install
Zega Pro Top Case
Zega Pro 38L Top Case - Ultimate Urban Motorcycle Accessory
Zega Pro 25L Top Case - Ultimate Urban Motorcycle Accessory
Zega Pro Rapid-Trap Quick Release Systems for Panniers and Top Cases
Zega Pro Accessories
Optional Pannier Locks Install


Free shipping on select Klim Gear
(Taken automatically at checkout. Free ship valid for whole order if combined w/ non-Klim products)

Thanks, TT USA

BMW:

All BMW Pannier Systems

1200 GS & GSA Zega Pro Pannier System

The Touratech Zega Pro pannier system is the best motorcycle luggage solution for your BMW R1200GS or GS Adventure. Many years of experience and testing have been put into the design of the Zega Pro panniers so you can know you have the ultimate hard luggage system mounted to your GS.

Touratech Zega Pro panniers have provided secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in 31, 38 and 45 liter sizes. Available in silver-anodized, black-anodized or raw aluminum.

These Zega Pro Pannier systems feature a narrower case mounted offset on the clutch side of your BMW to compensate for the exhaust. If you'd prefer a setup with an exhaust cutout for symmetry, order the Zega Pro Special Set

• Complete set with panniers, rack, and mounting hardware
• Available in bare aluminum, anodized silver, or anodized black
• Available in 31,38, 45 liter sizes
• Easy installation
• Made in Germany by Touratech
• Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction
• Electro-polished stainless-steel or Black powdercoated steel racks
• Bottle carriers, seat pads, inner bags, and many other accessories available
• Replaceable corner protection
• Add Locks for maximum security
• Total system width: 31/38L= 37 inches, 38/45L= 40 inches
• Fits BMW R1200GS & R1200GSA 2005-on

1200 GS & GSA Zega Pro Top Case System

Made from lightweight and durable aluminum, the Zega Pro top cases set the bar very high for quality build and finish. The cases can be equipped with an optional key lock for maximum security. The hinges and latch are constructed from laser-cut stainless steel for maximum strength and durability. The Zega Pro Top cases come in both 25 and 38 liter sizes and are available in raw aluminum, anodized black or anodized silver finishes.

Zega Pro top cases mount to a specially designed stainless steel topcase rack which easily installs onto existing mounting points on any model year BMW R1200GS. The bright stainless steel rack ensures the best durability, and stays looking nice with no paint or coatings to worry about.

• Fits all years BMW R1200GS
• Fits GS Adventure if stock top rack is removed, to retain stock rack, order kit 044-57ADV
• Made in Germany by Touratech
• Available in Bare Aluminum, Anodized Black, or Anodized Silver
• Available in 25 or 38 Liter Capacity
• 38 Liter Box will fit full face helmet
• Complete kit comes with topcase, mounting hardware, and stainless rack (044-5455)
• Add Locks 050-0871 & 050-0870 for maximum security
• Made out of aluminum alloy with stainless steel hardware

F800GS & F650GS-Twin Zega Pro Pannier System

Travel Panniers set for the BMW twin, F800GS and F650GS Twin. 31Liter + 38L silver-anodized, black-anodized or bare aluminum cases, with super-strong tubular racks. Everything is included.

The legendary ZEGA panniers have provided secure dry storage for adventure riders the world over. The engineers at Touratech have retained the proven mounting design and rugged construction while enhancing the looks and features for the next generation ZEGA PRO. For starters, the ZEGA PRO features a revolutionary dual purpose latch that also functions as a hinge and is available with optional key locks. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum with a combination of welded and stainless steel rivet construction. The worlds best adventure panniers just got better with the ZEGA PRO.

• Larger capacity with 31, 38 and 45 liter sizes
• Available in Bare Aluminum, Anodized Black, or Anodized Silver
• Dual function latch hinges for quick access or releases completely for lid removal
• Replaceable corner protection
• Low profile anchor loops
• Made from 1.5mm aluminum with welded and stainless steel rivet construction
• Bottle carriers, seat pads, inner bags and many other accessories available
• Add Locks for maximum security
• 100% Made in Germany

F800GS & F650GS - Twin Zega Pro Rapid-Trap Top Case Rack

Made entirely of stainless steel and specifically designed for the BMW F800GS/650GS twin's mounting points, this topcase rack is a secure and durable way to attach ZEGA PRO Topcases with the Rapid-Trap system to your motorcycle.

• Easy to install
• Made of polished stainless steel
• Add Locks 050-0871 & 050-0870 for maximum security
• Does not work with Hepco Becker Pannier racks

G650GS / Sertao, F650GS / Dakar (single) Zega Pro Pannier System

Turn your BMW G650GS, Sertao, F650GS, or Dakar into the ultimate adventure touring machine with a set of Touratech Zega Pro panniers.

Touratech Zega Pro panniers have provided secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in 31, 38 and 45 liter sizes.

• Complete set with panniers, rack, and mounting hardware
• Available in bare aluminum, anodized silver, or anodized black
• Available in 31,38, 45 liter sizes
• Easy installation
• Made in Germany by Touratech
• Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction
• Electro-polished stainless-steel or Black epoxy - coated steel racks
• Bottle carriers, seat pads, inner bags, and many other accessories available
• Replaceable corner protection
• Add Locks for maximum security
• Total system width: 31L= 37 inches, 38L= 40", 45L= 43"
• Fits BMW G650GS & Sertao, 2009-on
• Fits BMW F650GS & Dakar (single cyl.), 2001-2007

G650GS / Sertao, F650GS / Dakar (single) Zega Pro Top Case System

The Zega Pro Topcase from Touratech is the perfect piece of touring luggage for your BMW G650GS, F650GS, Sertao, or Dakar motorcycle. These top cases are made of the highest quality materials and the Rapid-Trap quick-release system makes it a breeze to remove from your BMW when needed. Everything you need to install the top case on your BMW 650 is included in this package.

Made from lightweight and durable aluminum, the Zega Pro top cases set the bar very high for quality build and finish. The cases can be equipped with an optional key lock for maximum security. The hinges and latch are constructed from laser-cut stainless steel for maximum strength and durability. The Zega Pro Top cases come in both 25 and 38 liter sizes and are available in raw aluminum, anodized black or anodized silver finishes.

Zega Pro top cases mount to a specially designed stainless steel topcase rack which easily installs onto your BMW G650GS or F650GS. The bright stainless steel rack ensures the best durability, and stays looking nice with no paint or coatings to worry about.

Everything you need to install the Zega Pro topcase to your BMW 650 is included in this kit: the stainless steel topcase rack (300-5455) and a Rapid-Trap quick release equipped Zega Pro Topcase. We recommend adding locksets for the topcase lid and quick release system for maximum security. (part numbers 050-0870 and 050-0871.)

• Fits BMW G650GS / Sertao, 2009 and newer
• Fits BMW F650GS / Dakar, 2005-2007, (single cyl.)
• Made in Germany by Touratech
• Available in Bare Aluminum, Anodized Black, or Anodized Silver
• Available in 25 or 38 Liter Capacity
• 38 Liter Box will fit full face helmet
• Complete kit comes with topcase, mounting hardware, and stainless rack (044-5455)
• Add Locks 050-0871 & 050-0870 for maximum security
• Made out of aluminum alloy with stainless steel hardware

Super Tenere:

Zega Pro Pannier System

Yamaha Super Tenere XT1200Z Pannier System - The clear choice for luggage on your Yamaha Super Tenere XT1200Z is the Zega Pro pannier system from Touratech. With countless miles of on and off-road touring and testing under their belts, the desgners and engineers at Touratech have created the most robust, functional and attractive motorcycle luggage system on the market.
Touratech Zega Pro panniers have provided secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in 31, 38 and 45 liter sizes.

• Complete set with panniers, rack, and mounting hardware
• Available in bare aluminum, anodized silver, or anodized black
• Available in 31,38, 45 liter sizes
• Easy installation
• Made in Germany by Touratech
• Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction
• Electro-polished stainless-steel or Black epoxy coated stainless racks
• Bottle carriers, seat pads, inner bags, and many other accessories available
• Replaceable corner protection
• Add Locks for maximum security
• Total system width: 31/38L= 38 inches, 38/45L= 41 inches
• Fits Yamaha Super Tenere XT1200Z

Zega Pro Rapid-Trap Top Case System

The Zega Pro Top Case with Rapid Trap mounting system provides safe and secure storage on the tail of your Yamaha Super Tenere and features a quick release mount that allows the case to be attached to the motorcycle in seconds.

Precision crafted from lightweight and durable aluminum, the Zega Pro top cases set the bar very high for quality build and clean finish. The cases can be equipped with an optional key lock for maximum security. The hinges and latch are constructed from laser-cut stainless steel for maximum strength and durability. The Zega Pro Top cases come in both 25 and 38 liter sizes and are available in raw aluminum, anodized black or anodized silver finish.

Zega Pro top cases mount to a stainless steel topcase rack which is designed to bolt right onto existing mounting points on the Yamaha Super Tenere XT1200Z.

Everything you need to install the Zega Pro topcase to your Yamaha is included in this kit: the stainless steel topcase rack (#046-0610), all required mounting hardware, and a Rapid-Trap quick release equipped Zega Pro Topcase. We recommend adding locksets for the topcase lid and quick release system for maximum security. (part numbers 050-0870 and 050-0871.)

• Available in Bare Aluminum, Anodized Black, or Anodized Silver
• Available in 25 or 38 Liter Capacity
• 38 Liter Box will fit full face helmet
• Complete kit comes with topcase and stainless rack (#046-0610)
• Add Locks 050-0871 & 050-0870 for maximum security
• Made out of aluminum alloy with stainless steel hardware
• Made in Germany by Touratech

650 Vstrom:

Zega Pro Pannier System

The legendary ZEGA panniers have provided secure dry storage for adventure riders the world over. The engineers at Touratech have retained the proven mounting design and rugged construction while enhancing the looks and features for the next generation ZEGA PRO. For starters, the ZEGA PRO features a revolutionary dual purpose latch that also functions as a hinge and is available with optional key locks.

The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy travel companions are available in 31, 38 and 45 liter sizes. The worlds best adventure panniers just got better with the ZEGA PRO.

• Larger capacity with 31, 38 and 45 liter sizes
• Dual function latch hinges for quick access or releases completely for lid removal
• Replaceable corner protection
• Low profile anchor loops
• Made from 1.5mm aluminum with welded and stainless steel rivet construction
• Available in classic bare aluminum or silver or black hard anodized finish
• Bottle carriers, seat pads, inner bags and many other accessories available
• Add Locks for maximum security
• Total system width: approx. 40 inches installed
• Fits all model years, Suzuki V-Strom DL 650, including 2012 and newer models
• 100% Made in Germany

Zega Pro Top Case Rapid-Trap Rack 2011-older
Zega Pro Top Case Rapid-Trap Rack 2012-on

This stainless steel rack from Touratech is designed specifically for the Suzuki V-Strom DL650 and accepts any Rapid-Trap equipped Zega Pro topcase.

Easy to install, no modifications to tail section necessary. All hardware is included in the kit.

• Made of electro-polished stainless steel
• Easy to install
• Attaches to Suzuki V-Strom DL650
• Made in Germany by Touratech
• For use with Rapid-Trap Zega Pro Top Cases
• Add Locks 050-0871 & 050-0870 for maximum security
• Photos are from 2012 DL650 but 2011-older listing is the correct part #.

1000 Vstrom:

Zega Pro Pannier System

The legendary ZEGA panniers have provided secure dry storage for adventure riders the world over. The engineers at Touratech have retained the proven mounting design and rugged construction while enhancing the looks and features for the next generation ZEGA PRO. For starters, the ZEGA PRO features a revolutionary dual purpose latch that also functions as a hinge and is available with optional key locks.

The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy travel companions are available in 31, 38 and 45 liter sizes. The worlds best adventure panniers just got better with the ZEGA PRO.

• Larger capacity with 31, 38 and 45 liter sizes
• Dual function latch hinges for quick access or releases completely for lid removal
• Replaceable corner protection
• Low profile anchor loops
• Made from 1.5mm aluminum with welded and stainless steel rivet construction
• Available in classic bare aluminum or silver or black hard anodized finish
• Bottle carriers, seat pads, inner bags and many other accessories available
• Add Locks for maximum security
• Fits all years Suzuki DL1000
• 100% Made in Germany

2008-on KLR650:

Zega Pro Pannier System

Kawasaki KLR650 Pannier System - This complete Zega Pro pannier system from Touratech is engineered specifically for the Kawasaki KLR 650, and provides the ultimate in secure and dry storage for your motorcycle travels. When it comes to motorcycle luggage, nothing compares to aluminum with it's light weight and strength. Touratech is the leading manufacturer of aluminum motorcycle panniers, industry wide.

Touratech Zega Pro panniers have provided secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in 31, 38 and 45 liter sizes.

• Complete set with panniers, rack, and mounting hardware
• Available in bare aluminum, anodized silver, or anodized black
• Available in 31,38, 45 liter sizes
• Easy installation
• Made in Germany by Touratech
• Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction
• Black, epoxy-coated steel racks
• Bottle carriers, seat pads, inner bags, and many other accessories available
• Replaceable corner protection
• Add Locks for maximum security
• Total system width: 31/38L= 38 inches, 38/45L= 41 inches
• Fits Kawasaki KLR650, 2008 and newer
• Does not affect passenger comfort

Zega Pro Rapid-Trap Top Case Rack

This stainless steel rack from Touratech is designed specifically for the KLR650 and accepts any Rapid-Trap equipped Zega Pro topcase.

Easy to install, no modifications to tail section necessary. All hardware is included in the kit.

• Made of electro-polished stainless steel
• Easy to install
• Attaches to KLR 650 Top Rack, 2008 and newer
• Made in Germany by Touratech
• Add Locks 050-0871 & 050-0870 for maximum security
• For use with Rapid-Trap Zega Pro Top Cases

KTM:

950/990 ADV & 950 SE Zega Pro Pannier System

The most robust pannier system you can buy for the KTM LC8 Adventure! Many years of experience building pannier racks and countless hours of product testing have allowed us to create the strongest rack possible while still maintaining a narrow width on the motorcycle.

The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points. Passenger comfort is not restricted in any way.

The legendary ZEGA panniers have provided secure dry storage for adventure riders the world over. The engineers at Touratech have retained the proven mounting design and rugged construction while enhancing the looks and features for the next generation ZEGA PRO. For starters, the ZEGA PRO features a revolutionary dual purpose latch that also functions as a hinge and is available with optional key locks.

The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy travel companions are available in 31, 38 and 45 liter sizes as well as silver and black anodized finishes. The world's best adventure panniers just got better with the ZEGA PRO.

• Dual function latch hinges for quick access or releases completely for lid removal
• Replaceable corner protection
• Low profile anchor loops
• Made from 1.5mm aluminum with welded and stainless steel rivet construction
• Available in classic bare aluminum or silver or black hard anodized finish
• Electro-Polished Stainless Steel Rack
• Bottle carriers, seat pads, inner bags and many other accessories available
• Add Locks for maximum security
• Total system width: 31L= 36.5 inches, 38L= 39.6 inches, 45L= 42.75 inches
• 100% Made in Germany

690 Enduro Zega Pro Pannier System

Extremely sturdy case system. Perfectly suitable for trail and off-road use with specially adapted Zega Pro cases, with 31 and 38 litres capacity, watertight and optionally lockable.

The overall width of the case system installed ready for the road is only approx. 94 cm.
Touratech ZEGA PRO Pannier System

The legendary ZEGA panniers have provided secure dry storage for adventure riders the world over. The engineers at Touratech have retained the proven mounting design and rugged construction while enhancing the looks and features for the next generation ZEGA PRO. For starters, the ZEGA PRO features a revolutionary dual purpose latch that also functions as a hinge and is available with optional key locks.

The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy travel companions are available in 31, 38 and 45 liter sizes. The worlds best adventure panniers just got better with the ZEGA PRO.

• Larger capacity with 31, 38 and 45 liter sizes
• Dual function latch hinges for quick access or releases completely for lid removal
• Replaceable corner protection
• Low profile anchor loops
• Made from 1.5mm aluminum with welded and stainless steel rivet construction
• Available in classic bare aluminum or silver hard anodized finish
• Please call 1-800-491-2926 to order black anodized finish
• Bottle carriers, seat pads, inner bags and many other accessories available
• Add Locks for maximum security
• 100% Made in Germany

Triumph:

Tiger 800 Zega Pro Pannier System

The legendary ZEGA panniers have provided secure dry storage for adventure riders the world over. The engineers at Touratech have retained the proven mounting design and rugged construction while enhancing the looks and features for the next generation ZEGA PRO. For starters, the ZEGA PRO features a revolutionary dual purpose latch that also functions as a hinge and is available with optional key locks.

The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy travel companions are available in 31, 38 and 45 liter sizes. The worlds best adventure panniers just got better with the ZEGA PRO.

• Larger capacity with 31, 38 and 45 liter sizes
• Dual function latch hinges for quick access or releases completely for lid removal
• Replaceable corner protection
• Low profile anchor loops
• Made from 1.5mm aluminum with welded and stainless steel rivet construction
• Available in classic bare aluminum or silver or black hard anodized finish
• Bottle carriers, seat pads, inner bags and many other accessories available
• Add Locks for maximum security
• 31/38L set installed width: approx 39"
• 38/45L set installed width: approx 42"
• Narrower special-set available
• 100% Made in Germany

Tiger 800 Zega Pro Rapid-Trap Top Case Rack

Made entirely of stainless steel and specifically designed for the Triumph Tiger 800 and 800 XC's mounting points, this topcase rack is a secure and durable way to attach ZEGA PRO Topcases with the Rapid-Trap system to your motorcycle.

• Easy to Install
• Made of Stainless Steel
• For use with Rapid-Trap Zega Pro Top Cases
• Add Locks 050-0871 & 050-0870 for maximum security

Tiger Explorer 1200 Zega Pro Pannier System

Triumph Tiger Explorer 1200 Pannier System - The expert pannier makers at Touratech have used their years of design experience and testing to create this complete Zega Pro luggage system for your Triumph Tiger Explorer 1200. Everything you need is included with this pannier kit.

Touratech Zega Pro panniers have provided secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in 31, 38 and 45 liter sizes

• Complete set with panniers, rack, and mounting hardware
• Available in bare aluminum, anodized silver, or anodized black
• Available in 31,38, 45 liter sizes
• Easy installation
• Made in Germany by Touratech
• Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction
• Electro-polished stainless-steel or Black powdercoated steel racks
• Bottle carriers, seat pads, inner bags, and many other accessories available
• Replaceable corner protection
• Add Locks for maximum security
• Total system width: 31/38L= 37 inches, 38/45L= 40 inches
• Fits Triumph Tiger Explorer 1200, 2012-on

Tiger 1200 Explorer Rapid-Trap Top Case Rack

This strong and durable topcase rack for the Triumph Tiger 1200 Explorer gives you a stable place to mount any Rapid-Trap equipped Zega or Zega Pro topcase.

Made entirely of stainless steel and specifically designed for the Triumph Tiger 1200 Explorer attachment points, the Topcase rack is the perfect way to attach ZEGA PRO Topcases equipped with the Rapid Trap system to your bike. The Topcase rack can be used on its own or in conjunction with our pannier system.

All mounting hardware is included in the kit, making this rack quick and easy to install on your Triumph.

• Made of Electro-Polished Stainless Steel
• Easy to Install
• Fits Triumph Tiger Explorer 1200
• For use with Rapid-Trap Zega Pro Top Cases
• Add Locks 050-0871 & 050-0870 for maximum security
• Made in Germany by Touratech

Ducati:

Multistrada 1200 Zega Pro Pannier System

Get the best in aluminum touring luggage for your Ducati Multistrada with a Zega Pro pannier system from Touratech. Many years of development and thorough testing worldwide has gone into the production of Zega Pro panniers, making them the best motorcycle luggage solution on the market for your Ducati.

Touratech Zega Pro panniers have provided secure dry storage for adventure riders the world over. The body and removable lid feature rounded lines with rugged corner protection that is easily replaceable. Low profile anchor loops provide a flat surface that makes the pannier a good seat at the campfire. Crafted with 1.5mm aluminum and welded/stainless steel rivet construction these sturdy panniers are available in 31, 38, and 45 liter sizes.

• Complete set with panniers, rack, and mounting hardware
• Available in bare aluminum, anodized silver, or anodized black
• Available in 31, 38, or 45 liter sizes
• Easy installation
• Made in Germany by Touratech
• Panniers made from 1.5mm aluminum with welded and stainless steel rivet construction
• Electro-polished stainless-steel racks
• Bottle carriers, seat pads, inner bags, and many other accessories available
• Replaceable corner protection
• Add Locks for maximum security
• Total system width: 31L= 35 inches, 38L= 38 inches, 45L= 41 inches
• Fits Ducati Multistrada 1200, 2010-on
• NOT compatible with GIVI topcase mounts

Multistrada 1200 Zega Pro Top Case System

Perfect for commuting or touring, the Zega Pro topcase from Touratech is one of the most durable and secure motorcycle luggage solutions available for your Ducati Multistrada 1200.

Made from lightweight and durable aluminum, the Zega Pro top cases set the bar very high for quality build and finish. The cases can be equipped with an optional key lock for maximum security. The hinges and latch are constructed from laser-cut stainless steel for maximum strength and durability. The Zega Pro Top cases come in both 25 and 38 liter sizes and are available in raw aluminum, anodized black or anodized silver finishes.

The mounting rack for the Zega Pro topcase is made out of electro-polished stainless steel tubing and is ultra-strong. It installs easily to existing mounting points on the Ducati Multistrada in minutes and allows the Rapid-Trap quick release system on the top case to attach firmly.

Everything you need to install the Zega Pro topcase to your Ducati Multistrada 1200 is included in this kit: the stainless steel topcase rack (620-0010), all required mounting hardware, and a Rapid-Trap quick release equipped Zega Pro Topcase. We recommend adding locksets for the top case lid and quick release system for maximum security. (part numbers 050-0870 and 050-0871).

• Fits all years Ducati Multistrada 1200
• Made in Germany by Touratech
• Available in Bare Aluminum, Anodized Black, or Anodized Silver
• Available in 25 or 38 Liter Capacity
• 38 Liter Box will fit full face helmet
• Complete kit comes with topcase and stainless rack (620-0010)
• Add Locks 050-0871 & 050-0870 for maximum security
• Made out of aluminum alloy with stainless steel hardware

Other Bikes:

Buell Ulysses
Aprilia Capanord
Triumph Tiger 955i
KTM LC4 620 & 640

Soft Luggage & Accessories:

Giant Loop bags
Dry Bags
Tank/Tail/Travel Bags
Strap Systems
Backpacks
Tool Bags


Giant Loop Great Basin - $439

Designed specifically for BMWs, Suzuki V-Strom, KTM 950, 990, Adventure and SE models, 690e, Kawasaki KLR 650 - and just about any other machine with the capacity to carry a passenger the Great Basin is our soft luggage problem solver for adventure touring bikes. Travel lighter and faster with the only saddle bag system that becomes an integrated part of your motorcycle. The Great Basin Saddlebag requires no sub-frame modifications, racks or braces. It's designed to sit over top the passenger area of the seat. This bag is made with the highest-grade truck tarp material and can withstand years of abuse. It's also the perfect interchangeable travel-bag for those with multiple bikes.

Giant Loop Great Basin fits these makes and models, but can be used on any bike with a large rear seat area.

*KTM: 690, LC8 950, LC8 990, 650SE
*BMW: F800GS, Xchallenge, F650GS-Twin
*Suzuki: DR650 and V-Strom DL650, DL1000
*Honda: XR650L
*Kawasaki: KLR650




Giant Loop Coyote - $329

The Coyote Saddlebag is the best choice for hard-core off-road expeditions on dirt bike or dualsport model motorcycles. Straps on. Stays on. No matter what.

Travel lighter and faster with the only saddle bag system that combines two motorcycle panniers and a tail bag into a single biomorphic shape, requiring no sub-frame modifications, racks or braces. For dualsport and offroad dirt bike touring, theres no better saddlebag to carry your gear. For supermoto and motard style bikes, the Coyote Saddlebag is the clean, streamlined saddlebag to pack rain gear and other essentials for the city.

The Coyote is made from the same bomber tarp material as the Great Basin and also includes inner stuff bags to organize your gear.
It has fender clips to sit on the rear fender of your bike (if you have no rear rack) but can also sit on the rear seat and strap through a rear rack/grab rails with the center straps. Includes new zipper design and Hot Spring muffler shield that bolts to your muffler and keeps the heat away from the bag.

Giant Loop Coyote fits these makes and models

• Beta: 450/525 RS Dual Sport / SuperMoto
• BMW: G450X, F650, G650, X-Challenge, Cross-Country, HP2
• KTM: all models 200, 300, 400, 450, 525, 530 RXC 400, 450, 620, 640/640 ADV, 690 Enduro, 950/990 ADV, 950 SE
• Husaberg: FE 390, FE 450, FE 570
• Husqvarna: TE 250, 450, 510, 610, 630 and SM models
• Honda: all XR series, all CRF series
• Suzuki: all DR series and RM-Z
• Yamaha: all WR series and YZF
• Kawasaki: All KLX and KLR






Ortlieb Waterproof Soft Panniers / Luggage

Ortlieb Moto saddlebags are waterproof, dustproof soft motorcycle panniers that are easily adaptable to fit a wide variety of motorcycles. They feature a roll-up closure, which has proven itself time and again over the years,“ made from extremely wear and crease-resistant synthetic material.

With their wide Velcro closures, lashing straps and sturdy bracing inside the bags, this luggage system can be attached safely and securely to your motorcycle. The symmetrical design also leaves enough space for a passenger.

NOTE: Be sure to leave enough clearance around your exhaust pipe. No heat shield is included.

• Waterproof and Dustproof
• Made in Germany
• Bracing inside the bag aids stability
• Inner pocket with organizer compartments
• Practical carrying handle
• Easy to clean inside
• Can be repaired on the road
• Easy to attach with wide Velcro fastenings and lashing straps
• Symmetrical shape leaves enough space for passenger
• Two bright 3M Scotchlite reflectors
• Thermoformed back panel
• Capacity: 52 liters total
• Weight: 74.1 oz (4.6 lbs)
• Length: 13 in.
• Upper width: 15 in.
• Bottom width: 11 in.
• Depth: 8.3 in.

Ortlieb Dry Bag Duffel

Panniers full? Traditional dry bags are great for extra storage, but with the narrow roll closures, they can be a pain when you need to get something at the bottom of the bag. Heres the solution: Ortlieb came up with this dry bag duffel that rolls closed along its length, giving you quick access to the entire bag.
Large opening for easy packing and unpacking. With rugged carrying handles.

• Waterproof
• Padded shoulder strap
• Made in Germany

Picture of the day:

Any chance you'd be doing any sort of discounts or group buy promos?

Not at this time. Sorry.
Thanks for asking, TT

POTD: One of our favorite photos from the 2012 Touratech catalog.

Purchased my Zega Pro panniers from Touratech USA. Very happy with the product. Used them on the 990 Adv during a 3,300 km trip last summer. You get what you pay for!

The unfortunate part is that you pay 50% more than in Germany where the stuff is build. That's why I'm not buying the stuff in the US.

I would think that there would be enough people that would want the Zega Pros to get a group buy together to save some money. Start a thread and my name will be added to the list. I think I can get 10% off from my bike dealer so hopefully you could top that.

BMW HP4

http://www.bmw-motorrad.com/com/en/index.html?content=/com/en/bike/sportbikes/hp4/hp4_overview.html

Thanks for the feedback!

2012 Pacific NW Adventure Rally
Events list:

<iframe width="560" height="315" src="http://www.youtube.com/embed/dxV_OV92WeI" frameborder="0" allowfullscreen></iframe>

Those Zega Pro panniers are very attractive.

I'll be in the market for a Tenere set in the next few weeks; what's the expected timing of a group buy?

I'm super stoked to have picked up a bike so heavily loaded with Touratech goodies. Skid plate, bar risers, headlight guard, hand guards and the Zege pannier system. Sweet.